09-09-2015, 11:35 AM
USB driver download link: http://www.rayfile.com/files/62c7108c-9ab0-11e0-94eb-0015c55db73d/
1, install the SN_write_tool_exe_v2.1052.0.rar, namely “MTK 6516 SN write tool”
SN_write_tool_exe_v2.1052.0.rar download link :
http://www.rayfile.com/files/c60219e8-9a...5c55db73d/
2.Double clikc the SN_STATION tool .as below
SN_Write_station_tool
3.connect the mobile phone (without battery )with your PC via flash USB cable .make the necessary setting as blew one by one.
01 select the “write IMEI+backup nvram” ,as picture shown.
SN Writer Log
02: select “smartphone” ( by default ) :
tick off Smartphone
03elect the “Meta mode”
04: your PC will set the COM port automatically when you plug in the Flash USB cable.
05 and 06: tick off the “Check sum” and “Dual IMEI “( if your phone is dual sim support)
IMEI options
07: click the “modem database “ button ,and click relative database, select the file which begin with “BPLG”
(For M98 ,fastcardtech offers 2 database : database for android UI and database for iphone UI .select according to your phone target interface )
Database download link :http://www.rayfile.com/files/c60219e8-9a...5c55db73d/
data base
data base 2
08: click the “AP database “ button , select the file which begin with “APDB” in the textbox
Database3
09: tick off “set the clean boot ”
tick off “set the clean boot
10: Press the “START(F6)”
4.After press the “START(F6)” ,you will enter the windows as below
More Imei Input console
5,you will start to input the IMEI number ,(if the phone is only solo sim support ,input only 1 IMEI number )then click OK button to comfirm .
(Open the phone ‘ backcover ,you will get the IMEI number in the inside lable .input as the lable shown.)
6. Plug in the battery ,long press the “Power on “key ,if the scree show “Meta mode “ and The big button “wirte result indicator” turn Green in the the SN write tool ,the SN wirte succeed
IMEI write finish
7,so the IEMI wirte finished.Enter the *#06# to get your IMEI number
1, install the SN_write_tool_exe_v2.1052.0.rar, namely “MTK 6516 SN write tool”
SN_write_tool_exe_v2.1052.0.rar download link :
http://www.rayfile.com/files/c60219e8-9a...5c55db73d/
2.Double clikc the SN_STATION tool .as below
SN_Write_station_tool
3.connect the mobile phone (without battery )with your PC via flash USB cable .make the necessary setting as blew one by one.
01 select the “write IMEI+backup nvram” ,as picture shown.
SN Writer Log
02: select “smartphone” ( by default ) :
tick off Smartphone
03elect the “Meta mode”
04: your PC will set the COM port automatically when you plug in the Flash USB cable.
05 and 06: tick off the “Check sum” and “Dual IMEI “( if your phone is dual sim support)
IMEI options
07: click the “modem database “ button ,and click relative database, select the file which begin with “BPLG”
(For M98 ,fastcardtech offers 2 database : database for android UI and database for iphone UI .select according to your phone target interface )
Database download link :http://www.rayfile.com/files/c60219e8-9a...5c55db73d/
data base
data base 2
08: click the “AP database “ button , select the file which begin with “APDB” in the textbox
Database3
09: tick off “set the clean boot ”
tick off “set the clean boot
10: Press the “START(F6)”
4.After press the “START(F6)” ,you will enter the windows as below
More Imei Input console
5,you will start to input the IMEI number ,(if the phone is only solo sim support ,input only 1 IMEI number )then click OK button to comfirm .
(Open the phone ‘ backcover ,you will get the IMEI number in the inside lable .input as the lable shown.)
6. Plug in the battery ,long press the “Power on “key ,if the scree show “Meta mode “ and The big button “wirte result indicator” turn Green in the the SN write tool ,the SN wirte succeed
IMEI write finish
7,so the IEMI wirte finished.Enter the *#06# to get your IMEI number